How to use a ladder
Ladders are commonly-used low-risk and short-duration tasks at height. Safety requirements related to ladders are set out in Schedule 6 of the Work at height regulations 2005, and stipulate that ladders can be used when a risk assessment has shown that other equipment is not necessary because of the low risk (eg the ladder will be level and stable), and short duration (generally, less than 30 minutes).
Ladders should be checked for any defects before use. The stiles should not be damaged, the feet should not be missing or worn (as this can cause the ladder to slip), rungs should not be loose, worn or missing; and locking mechanisms should be functioning correctly.
Ladders should not be used on moveable, wet, icy, unstable or snow-covered surfaces, or within 6 m of an overhead power line. The pictogram or label on the ladder should be checked to ascertain the maximum weight that it can hold.
General safety precautions for using a ladder include:
- Positioning the ladder at 75° - the ‘1 in 4 rule’ (i.e. if the ladder is 4 m tall, the base should be 1 m from the building).
- The feet of the ladder should be sat firmly on the ground with timber blocks stacked beneath if the ground is not level.
- It should not be rested against upper surfaces that are weak or likely to break, such as glazing or guttering.
- Users should face the ladder when ascending and descending.
- Both hands should be used to hold the rungs.
- Three points of contact should be maintained when climbing (1 hand and 2 feet, or 2 hands and 1 foot).
- The ladder should not be ascended higher than the fourth rung from the top.
- A tool belt or holster should be used to carry tools and other equipment.
- The hips of the user should be within the vertical side rails without leaning to one or other side.
- The ladder should not be moved or extended while standing on the rungs.
- If necessary, or if used to access another level, ladders should be secured using ties.
- If the surrounding area is busy or in a public space (such as on a pavement), a suitable barrier or cones may be necessary as protection.
- A self-closing gate may be used at ladder access points.
[edit] Related articles on Designing Buildings Wiki
- Crane regulations.
- Hoists.
- Ladder.
- Lifting platform.
- Mobile elevating work platforms (MEWPs).
- Scaffold register.
- Scaffolding.
- Types of scaffolding.
- Work at height checklist for managers.
- Work at height.
- Working at height - our duty to prevent harm and protect each other.
- Work at height regulations.
- Working at height training.
- Working platform.
[edit] External references
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.